Mag sprocket for MC2 mag wanted by USA owner

This topic has 9 replies, 5 voices, and was last updated 14 years, 3 months ago by Deleted User.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
26th April 2012 at 1:56 pm #3020

Deleted User
Participant

I helped out Gary Schultz, a Scott owner in California by finding a correct MC2 magneto for him. I had it rebuilt by Sean Hawker who did a superb job on it so it is just like new!
It was from a Douglas and I had had it on my shelf for years. Now I realize that the much later Lucas Magdyno he has on the bike has the larger taper fixing. The MC2 has a smaller taper and from memory is retained by a central 1/4″ BSF bolt. Can anyone help and sell a mag sprocket with a small center taper to save making one specially. I promise I will not add anything to the price, only I would cover carriage. If you prefer to deal and send directly, just contact me and I will give all contact details. His bike is a credit to us and we only need this item to get it correct. Kindest Regards to all Roger

26th April 2012 at 3:51 pm #9916

Ian Parsons
Participant

Ken Lack used to stock mag sprockets with the small taper. I do not know if he still does.

26th April 2012 at 4:39 pm #9917

BRIAN MARSHALL
Participant

Mike Field made one for me at a very reasonable price a few years ago, and I think he can still produce them.
Brian

2nd May 2012 at 5:20 am #9918

Deleted User
Participant

Roger and fellow Scott Owners,
I can’t thank you enough for your generous support. I wouldn’t be able to put things together without your help! I hope to have the “Scott Mosquito Abatement Program” up and running soon.

cheers,
gary

2nd May 2012 at 10:10 am #9919

Deleted User
Participant

I talked to Ken Lack and he has made adapter sleeves to slip into the big taper of a sprocket and convert it to a small one. He is sending me one to forward to Gary and I will send a 1/4″ BSF bolt in case these are thin on the ground in USA. That only leaves the Chater Lee plug lead terminals and these are in a box I loaned to Rob Collet who is wiring up the four cylinder Phased Transfer bike at the moment. It’s good to help! Roger

3rd May 2012 at 2:09 pm #9920

Deleted User
Participant

A rare and remarkable object arrived in the mail yesterday: Christmas in May!
Wow, what an object of stellar beauty!

Special thanks to Roger and Sean Hawker for delivering such a remarkably beautiful Magneto. I can’t thank you enough!

cheers,
gary

3rd May 2012 at 3:42 pm #9921

Deleted User
Participant

There is nothing better than a happy customer when you have done for him no less than you would do for yourself R

3rd May 2012 at 4:50 pm #9922

Deleted User
Participant

sorry, the image location changed:

3rd May 2012 at 5:46 pm #9923

Deleted User
Participant

Hello Roger
Ichecked both m c 2 mags that i have with small taper both have three sixtenth [ or 2 ba ]retaining bolts hope this is of use maybe others have quater bsf for other years.
Regards D F .

4th May 2012 at 10:01 am #9924

Deleted User
Participant

Thanks for that info. I was not totally sure, however I have a hazy picture in my mind of a round headed screw with a fairly course thread. So if the thread is about 3/16″ the options are 2BA with 0.81mm pitch, 3/16 whit x 24 TPI, 3/16 BSF x 32 TPI also 3/16 BSC x 32 TPI and a few thou bigger the American 10 x 24 and 10 x 32
Any advice anyone? Maybe I should ask Sean Hawker Kind Regards Roger
Author

Posts

Viewing 10 posts - 1 through 10 (of 10 total)

The forum ‘General Scott topics’ is closed to new topics and replies.