HOME and how to join Forum Open Area General Scott topics Home made radiator project Reply To: Home made radiator project

Stuart Woods

Dear Geoff

Sorry for the delay I rarely use the forum I’m normally on the FB page as its easier to navigate around. Below is the company I ordered my tubes ftom 7mm diameter and they will supply them cut to length, just contact Angela and let her know your requirements.


I finished making the radiator a few months ago and had it nickel plated, I posted a full stage article on how to manufacture the radiator on Facebook, It looks daunting but when you break it down into steps they are fairly easy to construct. Attached is an image before I polished it up.



You must be logged in to view attached files.