HOME and how to join › Forum › Open Area › General Scott topics › Blowing door off with backfire › Reply To: Blowing door off with backfire
Thanks for the response Stan. I doubt that my flying disk has enough altitude to be picked up on radar…
You are probably correct on the air leak. I will check it tonight. I have 6 holes on the underside of my cases. One is pluged with epoxy, 2 have screws as plugs, and the other 3 are open. There is also a small hole on the lower right side edge of the cases. These holes are not cracks, but are all neatly drilled. Do these open to the crank? Would it be ok to seal them all with epoxy or do they serve some other purpose?
Mark