I intend to try another method. Blocking off one hose and fit a plug with a normal valve (one that I can measure) in the other end. That way at least I will know the pressure inside. And will be able to get more air in.
But, regardles the pressure, when the bike just stands it leaks water at several places. With the radiatorhoses not being 30 ft long ;o) there is no actual pressure. So why would the water leak out but not the compressed air? As far as I know air is not thicker than water…
And of course it could be water from the combustion but the smell, colour and freshness (it was almost as clear as tapwater, just like in my rad) would indicate it being radiator water.
And the brush? Well that is used to clean the cats litter box rather than my back ;o)
