HOME and how to join › Forum › Open Area › General Scott topics › Blowing door gaskets and sprockets › Reply To: Blowing door gaskets and sprockets
@Laurie: No the door has not been touched by the bigend and no, the flange is not damaged too… But I will give it a better check this evening and report back. I did notice that the second gasket went through at the same spot…
It is just that with the old gaskets I have never had any problem and now with the new ones I do…
I am pretty sure the chain is the right one. I have fitted 1/2 x 5/16 chain (428) as drive chain. As far as I know that is the right size. But I will check this too this evening.
I will give Ken a call on the sprocket. And if he cannot help it should not be too hard to remove the old teeth and then shrinkfit a new sprocket ring around the drum I think. But that is for the winter, now I just want to ride!!!