HOME and how to join Forum Open Area General Scott topics Foot gearchange mechanism problems Re: Re: Foot gearchange mechanism problems


Hi Roger, yes you are right the pin should stay between the springs and be assembled as a whole assembly,when I spoke to you at Shuttleworth I don`t think I explained the importance of getting the moving ratchet plate into the correct position by adjusting the length of the linkage between the moving plate and the gearbox indexing lever, this dictates the point of engagement between the pawl and ratchet plate and the amount of movement given to the linkage before the pawl hits the stop plate, hope this helps. Alan Noakes. scottworkshop@hotmail.co.uk