I might be able to help with an off-cut if you can specify the size of material you require, I assume you are talking of a bronze bush, in which case the hardness of the shaft will have a bearing, (no pun intended!), on the type of bronze required.
thanks efr 215 have had no success in e-mailing you with any details if you would be good enough to drop me an e-mail I can contact you with details of sizes etc thanks again for your consideration Steve
Hi Steve. Eddie Shermer might have bronze for this in stock. We collaborate to try and give an efficient service between us. I concentrate on engines and Eddie does transmission and various other things.
His phone no is 01889 590 401 and he lives at
Eddie Shermer Engineering
6 College Road Denstone
Staffs ST14 5HR
So very near you in Derbyshire.
Before you replace the bronze bush, you might ponder on why it needs replacing. Eddie can fit a snail cam for you to stop the usual pull back of the outrigger carrier that will save power loss, wear and undertray breakages. A step further is the needle roller bearing conversion instead of the bronze bush. Just food for thought as we have trodden this path years ago
Kind Regards Roger