1936 flyer rear wheel bearings | Scotts Owners Club

This topic has 1 reply, 2 voices, and was last updated 17 years, 5 months ago by Ian Parsons.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
17th December 2005 at 8:07 pm #1559

Steve
Participant

Hi I could do with pointing in the right direction, i have done some basic checking on my cush hub and in doing so checked the wheel bearings. I have found one of the outer races cracked. Reason i am stuck is the bearings are taper roller and appear to screw directly onto the spindle which to my simple mind tells me they might not be available off the shelf. Would be grateful for any help on where to go for replacements

19th December 2005 at 7:12 pm #6084

Ian Parsons
Keymaster

From memory there is a modification mentioned in Technicalities that involves making a new spindle so one can use current plain bore taper roller bearings. The screwed bor ones are v expensive and almost unobtainable
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.