20 Tooth Sproket for BTH Magneto | Scotts Owners Club

This topic has 4 replies, 4 voices, and was last updated 9 years, 4 months ago by Orgasmatron.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
19th May 2014 at 7:15 pm #3700

Orgasmatron
Participant

Does anyone have a 20 tooth sprocket to fit my BTH Type KD2 magneto?
The magneto has the small tapered fitting with key (secured with a nut on the end).
If not, does anyone know where I can get one?
Chris.

19th May 2014 at 7:28 pm #12372

BRIAN MARSHALL
Participant

Hi, In the past I have had new ones from both Ken Lack and Mike Field, but neither in recent years. Worth a couple of phone calls methinks…
Brian

20th May 2014 at 7:23 pm #12373

andy rowett
Participant

Brian I think I have a few mag sprockets tucked away somewhere, I will have a look tomorrow and let you know

23rd May 2014 at 5:49 pm #12374

Roger Moss
Participant

Hi Andy I have these on the shelf post or collect roger@mossengineering.co.uk or 01664 840215 Regards Roger Moss

25th May 2014 at 4:28 pm #12375

Orgasmatron
Participant

Thanks everyone. I will order the sprocket from Roger Moss.
Chris.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.