Belt-drive veteran Triumph | Scotts Owners Club

This topic has 4 replies, 3 voices, and was last updated 9 years, 12 months ago by BRIAN MARSHALL.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
1st October 2013 at 4:43 pm #3456

BRIAN MARSHALL
Participant

Hi, This is very much off the wall and off-topic, but one of you reading this may be able to help….
A good friend of mine, who is not computer literate, has had a Model H belt-drive veteran Triumph for 52 (!) years, using the same Brammer drive belt, but it is now on its last legs, and needs replacing. Can anyone advise me of a supplier of either 1″ or 1 and 1/8″ wide vee-belting that would be suitable ?
Brian (contact details as listed in Yowl under Eastern Section Information, or send me a PM ).

1st October 2013 at 7:23 pm #11486

Dripfeed
Participant

Hello Brien the V M C C shop can supply the correct rubber and canvas belting ( at a price !! ) How about a stab at google for Brammer the gent probably knows the correct direction that brammer should be fitted (a good number I note have them the wrong way ). I have always hung link belting with a heavy object attached for as long as pos before fitting .Regards D F.

1st October 2013 at 7:33 pm #11487

BRIAN MARSHALL
Participant

Thanks for the info, but it is a Vee belt, not a link belt, although I suppose he may have to consider changing over if he can’t get a suitable vee belt.
Brian

2nd October 2013 at 4:27 am #11488

john taylor
Participant

Hello Brian,
Google Veteran Triumph Spares they may be able to help. Regards John

2nd October 2013 at 1:31 pm #11489

BRIAN MARSHALL
Participant

Thank you John.
Brian
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.