Flying Sqirrel 1936

[Hanjo]

Hello !

I am looking for some parts for my Flying Squirrel 1936.
Please have a look at the photo.

[attachment=0:yk8wr8me]parts wanted-flying-sqirrel-1936 (Copy).jpg[/attachment:yk8wr8me]

Some detailed photos or sketch of the parts could be very helpful for me, or the parts of course.

I have got a question. How is the left cover, shown at the photo, fixed ? The part is missing at my Flying Squirrel.

[attachment=1:yk8wr8me]cover (Copy).jpg[/attachment:yk8wr8me]

Thank you for your help.

Hanjo

[dave bushell]

Hi Hanjo. The cover is retained by either a stud and nut that is screwed Into the outrigger bearing cover or a bolt that screws into the outrigger bearing cover .
Dave

[Hanjo]

Hi Dave !

Thank you for your help.

Hanjo

[BRIAN MARSHALL]

I have an original fitting that consists of a hollow stud in the circular outrigger bearing cap. Then the alloy shield is held in place by a hollow sleeve nut that has a grease nipple in the outer end of it. The sleeve nut screws onto the hollow stud, retaining the shield. The grease in the outrigger bearing can therefore be replenished without having to remove the alloy shield.
Brian

[Author]

Posts