PARTS WANTED PLEASE

[BRIAN MARSHALL]

Hi, I’ve recently acquired a couple of incomplete engines for future projects, and need the following parts to complete them :-

498cc DPZ detachable cylinder head, 498cc DPZ pistons at either plus .050″ or .060″ oversize, a 596cc longstroke blindhead cylinder barrel preferably without any frost damage or porting mods, but anything considered. I have all sorts of bits and pieces if preferred to cash….

My contact details are all as listed in Yowl under Eastern Section Information.
Brian

[TedParkin]

😀 😀 Pm sent 😀 😀 Ted

[BRIAN MARSHALL]

Thanks Ted

[Orgasmatron]

Brian,
I have the 498 cc blind head barrels from my 1930 TT Rep in good condition other than being worn on the bore. These are 40 thou oversize as are the pistons complete with rings and gudgeon pins.
Eddie Shermer was going to bore out the barrels for me and turn down some 600 cc pistons to make up a 540 cc motor.
However, I managed to obtain some 600 cc TT Rep barrels and he used these instead (as the 498 cc crank cases had been changed to 600 cc by a previous owner) to match the crank cases.
Chris.

[BRIAN MARSHALL]

Hello Chris,
I would be very interested in your blind-head barrel, etc.. How much do you want for it ? Perhaps best to send me a PM or contact me using my details as listed in Yowl under Section Information.
Regards,
Brian

[Orgasmatron]

Brian,
I sent an email to you using YOWLL-AT-HOTAIL.COM
Chris.

[Author]

Posts