Scott Kite Forks | Scotts Owners Club

This topic has 2 replies, 2 voices, and was last updated 10 years, 4 months ago by Orgasmatron.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
4th February 2013 at 11:14 am #3241

Orgasmatron
Participant

Is there a drawing available anywhere that shows how the Scott ‘kite’ forks are assembled?
I want to make sure everything is put back the same way as it was removed (without any ‘sapares’ at the end of the process).
I took the usual record photographs, but these don’t really help that much.
Chris.

4th February 2013 at 7:03 pm #10613

Dripfeed
Participant

Hello
thebook of the Scott 1932 edition page 60 has a drawing that would help . I would think that some scotters in your area would have a copy if not get back to me and i will try to photocopy the page . Regards D F.

4th February 2013 at 7:13 pm #10614

Orgasmatron
Participant

Thanks DF. I have the book, but an exploded diagrame is needed really.
Actually, I have got most of the reassembly sorted now. So, should be ok.
Can anyone let me know what size/thread the domed nuts are, that fix the girders to the ‘whateverthethingsarethattheyarefixedto’. Mine are rusty and need replacing.
Chris.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.