Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Kill switch: How do I make one?? #7937
    philpjuk
    Participant

    hi I have fitted a kill switch to the bth mag on my scott,I found a points cover with provision for a switch and have wired it to a horn button and it works fine but I have used ht cable as it seems to fit the outlet on the cover but it looks a bit of “overkill” I know that Im only earthing the primary voltage on the mag,What does everybody else use?thanks,phil.

    in reply to: post 1946 rear brake plate. #7788
    philpjuk
    Participant

    Many thanks to all for advice,I now have a new shipley plate from the velocette co,The new plate is interchangable with the old one and indistinguishable from the old one from the outside but the ribs on the inside are different and appear far stronger,great service from the Holders,cheers,phil.

    in reply to: post 1946 rear brake plate. #7787
    philpjuk
    Participant

    Hi,thanks Dave I now realise I require a late Shipley brakeplate and not a Birmingham one.cheers phil(still learning!)

    in reply to: B/HAM ALTERNATOR #7567
    philpjuk
    Participant

    there is one on ebay,no,160259357129,hope this helps,phil.

    in reply to: Stanford Hall 2007 #7000
    philpjuk
    Participant

    a great success,thanks to all who helped organise the rally and the clerk of the weather,phil.

    in reply to: Starting Birmingham Scott after long rest #6955
    philpjuk
    Participant

    Many years ago when I was told about ep oils being not compatible with yellow metal bearings I half filled a jamjar with ep 90 and placed a handful of brass bronze oilite and other bushes,this was between 30 and 40 years ago,the jamjar has moved house with me several times and has been on a shelf in my garage and been shaken ocasionaly,the bushes seem as good now as when they were put in but the tin jam jar lid is now quite rusty and the oil smells terrible(I think it did when I put it in!)I also mixed some castrol R and some viscostatic multigrade in annother jar and this has now turned into a nasty pink jelly!phil p-j.

    in reply to: kickstart spring #6247
    philpjuk
    Participant

    Sorry,just found what I wanted on the club spares list,missed it before.phil.

Viewing 7 posts - 1 through 7 (of 7 total)