I will enquire of my stockist.
I note following
OD Original 2.125″ Fag 50.292mm 1.980″ but housing could be sleeved
Bore Orig. 1.0625″ Fag 1.0625″ OK
Length Orig 20mm Fag 14mm can make spacers
The data sheet could be misleading
Overall assembly length “T” is given as 14mm
but
“B” that is the length of the cone and depicted as within the assembly is given as 14.732
I am sure they include the projecting cage although not shown.
It then comes down to the price of a spacer and a sleeve for the FAG and a ground out bore for the Timken.
Nothing is impossible,— just expensive!
