HOME and how to join Forum Open Area General Scott topics Need Oil and Gearbox Specifications Re: Re: Need Oil and Gearbox Specifications



So far PB Blaster Isn’t breaking the pistons free, I’ve soaked it again and will wait another day, I’ve also removed the plate exposing the flywheel but there isn’t much room to grab on to anything for turning. If it turns out that I need to remove the head do you have the sequence in removing the nuts and torque settings. If I remove the Pilgrim pump is there a crank nut I could get a breaker bar on?

In not knowing this motor I’m not clear what I can be hard on and what can’t.

Japanese 2 strokes are bullet proof so you can beat on them if necessary this on the hand I don’t think so…..