JOIN / LOGIN

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 19 total)
1 2
  • Author
    Posts
  • 9th March 2026 at 3:47 pm in reply to: Old Calendars #37524
    petehull64
    Participant

    9th March 2026 at 3:44 pm in reply to: Old Calendars #37523
    petehull64
    Participant

    10th March 2024 at 8:57 am in reply to: A Pile of Junk #35818
    petehull64
    Participant

    Pretty good for a pile of junk! Photo of other side? Never seen an exhaust like that!
    P.

    12th September 2022 at 2:43 pm in reply to: Silencer supplier #34327
    petehull64
    Participant

    Hi John

    Armour Motor Products Ltd. have various sizes available – also supplied from the spares scheme – I got one a few years back.

    Regards Peter

    26th May 2021 at 9:03 am in reply to: Clutch seal #32539
    petehull64
    Participant

    Does the spares scheme not supply a new nut with built in rubber seal?

    18th April 2020 at 5:03 pm in reply to: 1929 Tourer BF8746 #30787
    petehull64
    Participant

    Edward, I’ve sent you a message/photos on messenger re tank

    Regards Peter

    30th December 2019 at 10:22 pm in reply to: triangular tool box and engine front cover sheet #29922
    petehull64
    Participant

    Hi Martin
    I’m pretty sure the engine cover is available from Graham Moag of the spares scheme.
    Unfortunately the guy that used to make the triangular toolboxes passed away this year – not sure if someone else is making them now.
    Regards Peter

    21st November 2019 at 3:51 pm in reply to: Front sprocket #29828
    petehull64
    Participant

    These are also available from Graham Moag of the spares scheme – better to give him the business if you’re a member!

    4th January 2019 at 8:00 pm in reply to: Flyer sprockets #17242
    petehull64
    Participant

    Enfield type 40T sprockets are available from Richard Blackburn at “Scottparts” £140-£160 depending on whether you want the bore machined to fit your hub. Absolute bargain! and great quality.

    3rd January 2019 at 1:17 pm in reply to: 2-Speeder Fuel Tank Covering #17233
    petehull64
    Participant

    I thought the material was cut to size and then stitched vertically to form a cylinder. This is then stretched over the tank and held in place top and bottom by the aluminium strips ( available from Mike Field ) ?? No glue required !
    Peter.

    17th July 2018 at 7:04 pm in reply to: Sidestand #16853
    petehull64
    Participant

    I have a left hand side stand fitted to my ‘27 flyer – it sits nicely under the left hand exhaust using the front sidecar lug as a mounting point
    Peter

    17th January 2018 at 7:04 pm in reply to: "D" Section Mudguards #16361
    petehull64
    Participant

    I too am looking a D section mudguard for a 19″ flyer rear wheel and think I have found a source! Check out British Only Austria’s website part number : Store3.BS-1187. They also do one for 20″ and 21″ wheels at €99 + whatever they charge for postage. Doesn’t have the raised crown that Geoff was looking but looks right for what I need ?
    Peter

    11th January 2018 at 9:19 am in reply to: Which 2 stroke oil to use #10078
    petehull64
    Participant

    1. & 2. Miller oils 2 stroke self mix SAE40

    9th January 2018 at 6:34 pm in reply to: 2 SPEED SPARES WANTED #10093
    petehull64
    Participant

    Hi
    Mike Field (details in Yowl) does the tinware (side shields) that cover the 2 speed gear – also does the kickstart mechanism not sure about the kickstart arm itself though.
    Graham Moag has the exhausts listed (doesn’t always mean he has them in stock! ) but it’s worth a phonecall to him as he also has many other parts which aren’t on the spares list.
    Hope this is of some help.
    Regards Peter.

    23rd November 2017 at 5:02 pm in reply to: 1927/8 Flying Squirrel reg UP981 #16144
    petehull64
    Participant

    Be great to see a photo of it now! I can never post photos on this forum – always says ” file too large”
    Regards Peter

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 19 total)
1 2

MODELS

GALLERY

FORUM